|
|
|
7247-822
Feature Descriptions
The following is a list of all feature codes in numeric order.
Attributes, as defined in the following feature descriptions, state the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature without regard to interaction with other features.
The maximum valid quantity for MES orders may be different than for initial orders. The maximums listed below refer to the largest quantity of these two possibilities.
The order type defines if a feature is orderable only on initial orders, only on MES orders, on both initial and MES orders, or if a feature is supported on a model due to a model conversion. Supported features cannot be ordered on the converted model, only left on or removed from the converted model.
- (#0001) After-market Order Indicator
- Feature 0001 may be used for MES feature orders. This feature prevents configuration checking and allows "bulk quantity" ordering. It does not have to be repeated for subsequent MES orders for the same machine.
- Attributes provided: None
- Attributes required: None
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: None
- Initial Order/MES/Both/Supported: MES
- (#0986) CCS Customer Service Specify (US)
- (For IBM US, No Longer Available as of January 8, 1997)
- This chargeable feature specifies that the system will receive special request services from the Center for Customized Solutions (CCS)
- Feature 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1 (Initial Order maximum: 1)
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: I
- (#2010) 810MB Hard Disk Drive
- Provides 810MB of SCSI-2 disk storage.
- Characteristics:
- Formatted Capacity: 810MB
- Form Factor: 2.5-inch
- Average seek time: Rd-14ms, Wr-15ms
- Average Latency: 7.9ms
- Interface: SCSI-2
- SCSI-2 speed MB/s: Sync 5
- SCSI-2 speed MB/s: Async 3
- Attributes provided: 810MB disk capacity
- Attributes required: 1 hard disk bay
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: I
- (#2011) 810MB Hard Disk Drive (Base)
- (For IBM US, No Longer Available as of January 8, 1997)
- Provides 810MB of SCSI-2 disk storage.
- Characteristics:
- Formatted Capacity: 810MB
- Form Factor: 2.5-inch
- Average seek time: Rd-14ms, Wr-15ms
- Average Latency: 7.9ms
- Interface: SCSI-2
- SCSI-2 speed MB/s: Sync 5
- SCSI-2 speed MB/s: Async 3
- Attributes provided: 810MB disk capacity
- Attributes required: 1 hard disk bay
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#2020) 1.2GB Hard Disk Drive (Select)
- Select up from feature 2010. Provides 1.2GB of SCSI-2 disk storage.
- Characteristics:
- Formatted Capacity: 1.2MB
- Form Factor: 2.5-inch
- Average seek time: Rd-14ms, Wr-15ms
- Average Latency: 7.9ms
- Interface: SCSI-2
- SCSI-2 speed MB/s: Sync 10
- SCSI-2 speed MB/s: Async 3
- Attributes provided: 1.2GB disk capacity
- Attributes required: 1 hard disk bay
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: I
- (#2021) 1.2GB Hard Disk Drive
- Provides 1.2GB of SCSI-2 disk storage.
- Characteristics:
- Formatted Capacity: 1.2MB
- Form Factor: 2.5-inch
- Average seek time: Rd-14ms, Wr-15ms
- Average Latency: 7.9ms
- Interface: SCSI-2
- SCSI-2 speed MB/s: Sync 10
- SCSI-2 speed MB/s: Async 3
- Attributes provided: 1.2 GB disk capacity
- Attributes required: 1 hard disk bay
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: MES
- (#4011) 16MB DIMM
- (For IBM US, No Longer Available as of January 8, 1997)
- Provides additional system memory.
- Attributes provided: 16MB additional memory capacity
- Attributes required: 1 DIMM slot
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: B
- (#5006) Software Pre-Install (AIX only)
- This feature indicates that the customer desires AIX software that is ordered with the system to be pre-installed.
- Attributes provided: None
- Attributes required: None
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: I
- (#6041) Black Three Button Mouse
- (For IBM US, No Longer Available as of January 8, 1997)
- This device is used to provide the three button mouse capability to the system.
- Attributes provided: Three button mouse capability
- Attributes required: one mouse port
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: 4.1.4
- NT level required: None
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#6308) Personal Microphone
- (For IBM US, No Longer Available as of January 8, 1997)
- The IBM Personal Microphone is a lightweight microphone and headset which conveniently fits over and behind the user's ear. The microphone element is attached to the earpiece with a thin tubular boom. The IBM personal Microphone allows adjustments to be made to position the microphone and headset for either the left or right ear.
- The IBM Personal Microphone is a perfect addition to the microphone supplied with your system unit. It allows each user to have their own microphone.
- The microphone is suitable for a wide range of applications but is especially suited for speech recognition applications including dictation and navigation in an office environment. The microphone allows consistent performance by providing for an optimum distance for the voice source and the microphone element and providing concurrent feedback to the user via the personal headset.
- Attributes provided: microphone and headphone
- Attributes required: one microphone jack and one headphone jack
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#7020) 820 NiMH Battery - USA
- (For IBM US, No Longer Available as of January 8, 1997)
- This battery is used to provide power supply to the 7247.
- Attributes provided: power supply capability through battery
- Attributes required: one battery bay
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: Both
- (#7040) Travel Quick Charger-USA
- (For IBM US, No Longer Available as of January 8, 1997)
- This device is used to charge the 820 NiMH Battery Pack. The Travel Quick Charger's physical size makes it convenient for carrying with the 820.
- Attributes provided: Capability to charge the battery
- Attributes required: None
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: Both
- (#7080) AC Adapter - USA
- (For IBM US, No Longer Available as of January 8, 1997)
- This feature is used to supply electricity to the system when plugged into a stationary point outlet.
- Attributes provided: power supply
- Attributes required: AC power jack
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: Both
- (#8020) 10 Base2 Ethernet PCMCIA - English
- (No Longer Available as of January 8, 1997)
- The Ethernet Credit Card Adapter II offers the LAN attachment and performance capabilities of standard size adapters and is compliant with PCMCIA Standards Release 2.1. Included is a media access module with cable.
- Attributes provided: connectivity to 10 Base2 Ethernet
- Attributes required: one PCMCIA slot
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#8030) 10 BaseT Ethernet PCMCIA - US
- (For IBM US, No Longer Available as of January 8, 1997)
- The Ethernet Credit Card Adapter II offers the LAN attachment and performance capabilities of standard size adapters and is compliant with PCMCIA Standards Release 2.1. Included is an attachment cable (approximately 3m) with an RJ-45 connector.
- Attributes provided: Connectivity to 10 BaseT Ethernet
- Attributes required: one PCMCIA slot
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#8040) TokenRing PCMCIA - US English
- This PCMCIA card provides connectivity to the Token Ring network and:
- Supports unshielded twisted pair (UTP) and shielded twisted pair (STP) media without user action
- Supports the 802.5 Revision 2 standard that provides enhanced network reliability and interoperability with other LAN adapters in the network
- Attaches to either UTP-wired networks or STP-wired networks.
- Included is the following:
- Attachment cable (approximately 3m) with RJ-45 connector to STP wall outlet
- Data I/O STP connector for connection to STP wall outlet
- Attributes provided: Connectivity to TokenRing
- Attributes required: one PCMCIA slot
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: None
- Initial Order/MES/Both/Supported: Both
- (#8060) 14.4/14.4 Data Fax Modem - USA
- The PCMCIA modem, available in both 2400/9600bps and 14.4/14.4kbps (data/fax), integrates the Data Access Arrangement (DAA) into the PC card for a more convenient and reliable connection from the modem to the wall jack. Included is the following cable/connectors:
- PCMCIA to RJ11 cable
- Coupler for two RJ11 male connectors
- Attributes provided: Data/Fax modem
- Attributes required: one PCMCIA slot
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#8210) PS/2 Miniature Mouse
- (For IBM US, No Longer Available as of January 8, 1997)
- This feature is used to provide the two button miniature mouse to the system, in addition to the built-in TrackPoint III* pointing device.
- Attributes provided: external two button mouse
- Attributes required: one mouse port
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#8212) Keyboard/Mouse Connector
- (For IBM US, No Longer Available as of January 8, 1997)
- This device is required when an external keyboard is connected to the system.
- Attributes provided: both mouse port and keyboard port
- Attributes required: Keyboard/mouse port
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: Both
- (#8220) SCSI Hard Disk Drive 1.0GB
- Attributes provided: 1.0GB hard disk capacity
- Attributes required: External SCSI storage (#8222), Adapter to Option Cable (#8223), Terminator Cable (#8226)
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 5
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#8221) SCSI Hard Disk Drive 2.0GB
- (For IBM US, No Longer Available as of January 8, 1997)
- Attributes provided: 2.0GB hard disk capacity
- Attributes required: External SCSI storage (#8222), Adapter to Option Cable (#8223), Terminator Cable (#8226)
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 5
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#8222) External SCSI Storage Enclosure
- (For IBM US, No Longer Available as of January 8, 1997)
- This feature is an external enclosure that accepts a 3.5 inch or 5.25 inch half-high SCSI storage device such as a SCSI disk drive. It connects to the system unit via a SCSI cable attached to an 8-bit SCSI connector on the system and uses the integrated SCSI controller on the system board.
- The enclosure features a 32-watt universal power supply, a cover key lock assembly and mounting holes in the base assembly for added security. The enclosure adheres to the ANSI standard X.3.131-1986, which supports up to seven SCSI devices.
- Multiple enclosures may be stacked to satisfy storage requirements for LAN or other applications that require accessibility to large amounts of data.
- Attributes provided: Attachment of 3.5 or 5.25 half-high SCSI devices
- Attributes required: SCSI attachment cable and free SCSI address
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 5
- AIX level required: 4.1.4
- NT level required: 3.51
- Solaris level required: 2.5
- Initial Order/MES/Both/Supported: Both
- (#8223) Adapter to Option Cable
- (For IBM US, No Longer Available as of January 8, 1997)
- This feature is an external 8-bit SCSI cable used to connect the system unit to an external SCSI device such as the External SCSI Storage Enclosure (feature 8222). This cable connects to the connector of the SCSI controller integrated on the system board.
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: Both
- (#8224) SCSI-2 Cable Option to Option (long)
- (For IBM US, No Longer Available as of January 8, 1997)
- Feature 8224 is an 8-bit external SCSI cable used to connect external SCSI options to each other. The cable is approximately 1 meter long. A shorter version is also available -- see feature 8225.
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 4
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: Both
- (#8225) SCSI-2 Cable Option to Option (short)
- (For IBM US, No Longer Available as of January 8, 1997)
- This feature is an 8-bit external SCSI cable used to connect external SCSI options to each other. The cable is approximately .5 meters long. A longer version is also available -- see feature 8224.
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 4
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: Both
- (#8226) Terminator Cable
- (For IBM US, No Longer Available as of January 8, 1997)
- This cable is used to terminate externally attached SCSI devices and is used in conjunction with features 8223, 8224, and 8225. A terminator cable must be ordered with the first SCSI cable order.
- For 7247-822:
- Minimum required: 0
- Maximum allowed: 1
- AIX level required: None
- NT level required: None
- Solaris level required: None
- Initial Order/MES/Both/Supported: Both
|
|
|
|
|